Safe Marble is a two-component, solvent-based solution designed to protect surfaces sensitive to acids. It protects against the aggression of corrosive agents (lemon, red wine, vinegar, fruit juices, various sauces, certain detergents, cosmetics, etc.) and non-corrosive agents (water, coffee, oil, limestone, household chemicals, tea, perfumes, solvents, dust, etc.). Protection against acids is TEMPORARY, as soon as possible the surface must be cleaned and the staining agents removed. Very useful for protecting countertops, window sills, furniture and polished stone furnishings exposed to acid attack.
EXPLANATION: A treatment that ensures the surface's resistance to corrosive stains does not guarantee that it will never stain, but rather that, by using it, the best protection results against acid attack can be obtained. Thus, an untreated marble becomes dull as soon as the surface has been touched by a few drops of lemon juice, applying Safe Marble in most situations saves the surface for a sufficient period of time until the corrosive stains are removed. Maintaining the acid resistance for as long as possible (until the acid penetrates the protective layer) depends on the type of stone, the variety, the strength of the acid (the same type of acid can have different concentrations).
Advantages of SAFE MARBLE
Forms an imperceptible protective layer on the surface
Does not change the natural color
Does not allows acids to attack the surface directly
Does not exfoliate
It is a stable solution
Can be applied before or after assembly
It is “Food Contact” (does not contaminate the food it comes into contact with)
It is reversible (removable without mechanical action)
Corrects small surface imperfections
Easy to apply
Average lifespan of 2-3 years (depending on surface maintenance)
Application method – follow the instructions in the package (and the attached clip), essentially the steps to follow are:
1. Prepare the substrate, it must be clean (without previously applied waterproofing solutions or wax, without dust) and perfectly dry
2. Shake the containers and then combine the solutions in the package (Safe Marble and Safe Solvent), keep in mind that the solution obtained is stable for an hour and a half
3. Apply the resulting solution by spraying (on small surfaces it can be applied by pouring)
4. The roller from the delivery set is passed over the adhesive paper provided in the package, so that no impurities remain on the roller
5. Even it out with the roller, without exerting pressure on the roller (cross the surface with the roller 2-3 times)
6. Let it dry for a few hours or dry for 5 minutes using a heat gun (hot air dryer)
7. It matures in about 5 days, at ambient temperature (18º-25º C)
It is recommended that the application be carried out at a temperature of 10º-30º C.
Estimated consumption: one package covers 3-4 sq m
Storage: 3 years in a sealed container, in a cool, dry place, away from fire and frost.
Packaging: package containing 2 solutions: Safe Marble and Safe Solvent, roller cleaning paper, instructions for use. Comes with a roller.
Warning: do not leave the product within reach of children. Follow the instructions in the package and the precautions for use.
It is recommended that the application of the Safe Marble solution be carried out by authorized persons. The success of the operation depends on the condition of the surface, compliance with the working method and conditions.